How To Remove Latex Caulk From Painted Wall

Matt is a professional painter who owns and operates his own painting business, specializing in interior and exterior house painting.

Get communication from a professional painter on how to successfully paint high walls in your home.

Image by Solomon Rodgers from Pixabay

Tips for Painting High Walls

Painting high walls inside a dwelling is a project some homeowners avoid doing themselves, only it'due south actually quite like shooting fish in a barrel when you use the right business firm painting tools and equipment.

1. Cull the Right Equipment
2. Paint the Ceilings Before the Walls
3. Select the Best Paint Terminate
4. Repair Drywall and Tape Baseboard
5. Cut-in the Ceiling Line
6. Ringlet the Pigment Correctly
7. Consider an Extension Ladder Alternative

1. Cull the Right Equipment

An aluminum, 24-pes extension ladder is suitable for painting most ii-story walls in a home. Aluminum is much lighter than fiberglass, making it safer and easier to maneuver within the firm. For most high walls in a bedchamber, a 16-foot extension ladder is ideal, but sometimes y'all can get away with using an eight-foot step ladder.

2. Pigment the Ceiling Before the Walls

Skip this office if you lot aren't painting the ceiling. Simply if you are, ever pigment the ceiling before you paint the walls. This way it won't matter if yous drip a little paint on the walls in the process. If you were to paint the walls first, and the ceiling last, you would have to protect the walls with plastic and also castor in the ceiling pigment upside down to the wall edges, which is more challenging.

3. Select the Best Paint Finish

There isn't necessarily a right or incorrect paint finish for big walls within a home, but I don't recommend apartment or overly shiny paints for walls. Flat paint is fine for a ceiling. I would avoid semi-gloss or gloss paints unless you desire extra shiny walls that reflect more calorie-free. I have painted high walls in many homes and use matte and eggshell the most. It'due south a personal preference, but practice consider the current condition of the drywall as one of the determining factors. The more shiny the pigment is, the more than it will highlight wall imperfections similar nail pops and drywall seams.

4. Repair Drywall and Record Baseboard

Make full nail holes and brand whatsoever drywall repairs before painting. I like to sand the walls before I paint, using a metal sanding head attached to a painting pole. Sanding the walls files down bumps and removes roller hairs in the existing paint finish. It makes the walls nice and smooth. Tape off the height of the baseboard with Frog tape and remove outlet covers.

If you're painting the ceiling, also, then it's best to practise that before you beginning on the walls.

5. Cut-in the Ceiling Line

Before you roll any pigment onto the walls, consummate all of the castor work commencement, using an extension ladder. This role takes the longest because of the ladder piece of work involved- merely yous can put the ladder away after, considering the pigment rolling is done from the footing using a pole.

It volition probably take 2 coats with the brush, unless y'all're painting a color that's like to the existing paint. 2 coats e'er looks best, though. If you don't have a steady paw with the paint brush, you tin resort to using painter's record, but information technology will have a lot longer to insert the record into the corners, and tape doesn't always leave a straight line, either.

Ringlet to Continue

Read More From Dengarden

Step-by-Step Procedure

1. To keep the floor protected from dripping paint, identify drib cloths underneath the ladder. DO NOT ready the ladder with the feet directly on elevation of a drop cloth, or the ladder could slide across the flooring when you lot're on it. Always keep the ladder feet on the bare flooring itself.
2. Pour a petty pigment into a clean empty gallon tin can.
3. Snap a bucket claw onto the handle of the can and utilize it to hook the can to the top of the ladder after you lot climb up. The tin can takes up less space than a big bucket, and you tin go out it attached to the ladder and so you lot won't have both hands full while painting with the brush.
4. Prepare the ladder at i side of the room and work towards the other side.
5. Utilize a iii-inch paint brush to cut-in the meridian of the high walls. A wider 3-inch castor holds more paint and will make the job get a little faster. I like to get out a three" to iv" strip of paint at the wall peak when cutting-in, then information technology's easier to reach with the paint roller.

6. Curlicue the Paint Correctly

At present comes the fun part: rolling the pigment onto the walls. The proficient news is that you lot won't demand the ladder anymore. Head down to the paint shop and purchase a large painting pole. In some cases, a 4- to viii-foot pole will be long enough to reach the top of high walls if you stand on a stepladder. You tin can too buy a longer 8- to 12-foot painting pole, but in many cases the 4 to 8 pole is long enough and easier to work with.

Prep and Supplies

• Make sure all of the floors are protected with driblet cloths and the walls are repaired and sanded.
• For eggshell (shiny) paint, employ a 1/2" nap pigment roller, which produces smaller stipple marks on the wall. A thicker roller, such as three/4" nap, holds more pigment, but the roller stipple at the lesser of the walls will be noticeably heavy at center level if yous're using a shiny paint terminate.
• For apartment (non-shiny) paint, a three/4" nap roller is fine.

How to Apply the Pigment

When rolling paint onto high walls in a foyer, or any other room inside a habitation, start at the top and work your way downwards, but only work in sections; don't skip around.

Start at one side of the wall and work towards the other side for an fifty-fifty finish. If you're painting 2 coats on the walls, the first coat doesn't have to be rolled in a perfect style, as far as direction goes, merely the second coat must be rolled evenly, in i direction, to avert seeing roller marks after it dries.

For eggshell, or satin pigment, always roll the paint evenly from the top all the way down to the lesser. Avert rolling half the wall offset and the 2d one-half concluding. If you lot paint loftier walls that way, yous will see roller marks where the 2 sections overlap in the middle. It won't exist as noticeable with apartment paint, but it will stand out a lot with eggshell paint. Always roll from tiptop to bottom and don't cease the roller in the middle of the wall.

7. Consider an Extension Ladder Alternative

Scared of heights? At that place is one solution, only it takes more time and doesn't e'er produce the best results. Y'all can use a brush extender to cut-in loftier walls from the ground. A brush extender is a minor metal adapter that screws onto the end of a painting pole. Yous insert the paint brush handle into the end of it.

If you don't have any experience using a brush extender adapter, I would skip it altogether and apply an extendable pigment castor instead. These are easier to use and take many benefits over adapters. I employ the Goose Neck extendable paint brush for painting tricky high walls and ceilings. The castor itself is adjustable, no adapter needed. If you'd rather not climb upwards an extension ladder this tool is definitely the way to become.

This content is accurate and true to the best of the author'southward knowledge and is non meant to substitute for formal and individualized advice from a qualified professional.

© 2022 Matt G.

fyfx on Jan 21, 2022:

Cheers.

Source: https://dengarden.com/home-improvement/How-to-Paint-High-Walls

Share this post