How To Remove A Chain Link Fence Post In Concrete

The 5 Steps Of Chain Link Fence Removal

Whether upgrading to a new fence or merely replacing your current i, removing a chain link argue is a relatively easy process – providing you have the right steps. That said, the task can be quite laborious, and then make sure you get some help with the removal to make the job that flake easier.

Bank check out the 5 steps of chain link debate removal:

Step I – See If Someone Else Will Do Information technology For Y'all Kickoff!

Before getting into the removal process, it'due south worth mentioning that yous may be able to get someone to do the job for free! It'south quite common to detect ads on Craigslist or Facebook advertising a free chain link fence for those willing to remove information technology.

Granted, your contend needs to be in good condition, but information technology'southward certainly a much easier way of removing the debate!

So, if it's necessary to remove the fence yourself:

Step Ii – Separate concatenation link filigree from posts

There should be several narrow wire loops chosen fence ties that secure the concatenation link to the top of the fence rails. Remove these forth the length of the fence, and then start to remove the clips belongings the link fence to the vertical posts. Work your way along the length of the argue, detaching each of the links from the post. The chain link should simply autumn to footing. You'll probable need a commodities cutter with a sharp blade to complete this stride!

Step Three – Gather the chain link grid

The concatenation link should now be removed from the fence, after which it is simply a case of rolling it upwards – you should lay information technology out flat in the 1000 to make rolling it up easier. Likewise, gathering it up is quite hard if the chain link filigree is quite lengthy, in which case it's recommended that you cut it up into several smaller sections and so roll these up separately. Aim to roll the link grid into a tight cylinder, starting from one end and rolling until tightly packed, tying it with a wire or a rope to keep it held together.

Footstep 4 – Remove the tiptop rail

The debate should at present consist of just the poles and meridian rails, so the next pace is to loosen and remove the elevation rails section. Unless welded to the posts, removing it should be easier enough, typically needing yous to lose the nuts and bolts holding the superlative rails to the posts.
If the top rail is also secured to the posts or even welded together, you may need to use a more robust method such every bit a reciprocating saw, hacksaw, or hand grinder.

Step Five – Remove the posts

Posts are frequently the most difficult parts of a concatenation link fence to remove, specially when secured into the ground using concrete. Showtime this step past excavation around the posts to meet if there is whatsoever concrete embedding the post into the ground – soak the ground with water to make digging easier.

As nigh fences are installed using a concrete base, you're going to need to dig around the concrete base of operations, which helps lose the post for easier removal. Endeavor pushing and pulling the post after excavation up effectually the physical base – this commonly works in most cases.
Be aware that terminate and corner posts are more secure, and then yous may need to use a cutting saw to remove most of the postal service if y'all tin can't remove it past hand.

Call Diamond Contend Co. for all your fencing needs. Serving the Inland Empire area, we sell, design, and install chain link fences and barbed wire for residential and commercial properties. We have a retail showroom at our location in Redlands, and would be happy to give you a costless, no obligation estimate for whatsoever demand you take for fencing, cages, kennels, barbed wire, backstops, and many more applications. Basically, if it'south chain link anything, we tin do it, with your satisfaction guaranteed. For whatsoever questions, or to schedule an engagement, contact us online or give united states phone call at (909) 307-8255 today!

Source: https://diamondfence.com/the-5-steps-of-chain-link-fence-removal/

Share this post